Initial contact shapes the perception of friction.

Humans efficiently estimate the grip force necessary to lift a variety of objects, including slippery ones. The regulation of grip force starts with the initial contact and takes into account the surface properties, such as friction. This estimation of the frictional strength has been shown to depend critically on cutaneous information. However, the physical and perceptual mechanism that provides such early tactile information remains elusive. In this study, we developed a friction-modulation apparatus to elucidate the effects of the frictional properties of objects during initial contact. We found a correlation between participants' conscious perception of friction and radial strain patterns of skin deformation. The results provide insights into the tactile cues made available by contact mechanics to the sensorimotor regulation of grip, as well as to the conscious perception of the frictional properties of an object.

Tensile modulus of human orbital wall bones cut in sagittal and coronal planes.

In the current research, 68 specimens of orbital superior and/or medial walls taken from 33 human cadavers (12 females, 21 males) were subjected to uniaxial tension untill fracture. The samples were cut in the coronal (38 specimens) and sagittal (30 specimens) planes of the orbital wall. Apparent density (ρapp), tensile Young's modulus (E-modulus) and ultimate tensile strength (UTS) were identified. Innovative test protocols were used to minimize artifacts and analyze the obtained data: (1) grips dedicated to non-symmetrical samples clamping were applied for mechanical testing, (2) non-contact measuring system of video-extensometer was employed for displacement registration, (3) ink imprint technique coupled with CAD analysis was applied to precisely access the cross-sectional areas of tested samples. With regard to a pooled group, apparent density for the coronal and sagittal cut plane was equal 1.53 g/cm3 and 1.57 g/cm3, tensile Young's modulus 2.36 GPa and 2.14 GPa, and ultimate tensile strength 12.66 MPa and 14.35 MPa, respectively. No significant statistical differences (p > 0.05) were found for all the analyzed parameters when comparing coronal and sagittal plane cut groups. These observations confirmed the hypothesis that direction of sample cut does not affect the mechanical response of the orbital wall tissue, thus suggesting that mechanical properties of orbital wall bone show isotropic character.

Effect of different Kinesio tape tensions on experimentally-induced thermal and muscle pain in healthy adults.

Athletes and rehabilitation specialists have used Kinesio tape (KT) to help alleviate pain symptoms. Currently, no clear mechanism exists as to why pain is relieved with the use of KT and whether the pain relieving effect is simply a placebo effect. Additionally, the most effective taping parameters (tension of tape) for pain reduction remain unknown. We used quantitative sensory testing to address these key gaps in the KT and pain literature. Using a repeated-measures laboratory design, we examined whether KT applied at different tensions reduces experimentally-induced pain compared to a no tape condition and KT with minimal tension. Heat pain thresholds (HPT's), pressure pain thresholds (PPT's), and pressure pain suprathreshold (PPS: 125% of PPT) tests were administered to the forearm prior to and during KT and no tape conditions. Tape was applied to the ventral forearm at 25% of max tension, 75% of max tension, and no tension (placebo). Repeated measures ANOVA's evaluated the pain outcomes between conditions and across time. KT had no significant effect on PPT's and HPT's (p's >0.05). The ANOVA on PPS revealed that KT applied at 25% of tension significantly reduced pain ratings from the pretest (M = 34.4, SE = 5.5) to post-test 1 (M = 30.3, SE = 4.7) and post-test 2 (M = 30.4, SE = 4.7). No other conditions significantly reduced suprathreshold pressure pain. However, pain ratings at posttest-1 during the no-tape condition (M = 36.4, SE = 5.3) were significantly greater than pain ratings during post-test 1 and post-test 2 of all three tape conditions. In conclusion, the current study revealed that KT applied at low tension is the optimal tension to reduce pressure-evoked muscle pain. Additionally, the results suggested that KT applied at low, high, or no tension may acutely prevent increased muscle sensitivity with repeated pressure stimulation.

Green and efficient in-situ biosynthesis of antioxidant and antibacterial bacterial cellulose using wine pomace.

Biologically active bacterial cellulose (BC) was efficiently synthesized in situ using wine pomace and its hydrolysate. The structural and biomechanical properties together with the biological functions of the BC were investigated. Functional BC from wine pomace and its enzymatic hydrolysate were of high purity and had higher crystallinity indexes (90.61% and 89.88%, respectively) than that from HS medium (82.26%). FTIR results proved the in-situ bindings of polyphenols to the functionalized BC. Compared to BC from HS medium, wine pomace-based BC had more densely packed ultrafine fibrils, higher diameter range distributions of fiber ribbon, but lower thermal decomposition temperatures, as revealed by the SEM micrographs and DSC data. Meanwhile, wine pomace-based BC exhibited higher loads in tensile strength and higher hardness (4.95 ± 0.31 N and 5.13 ± 0.63 N, respectively) than BC in HS medium (3.43 ± 0.14 N). Furthermore, BC synthesized from wine pomace hydrolysate exhibited a slower release rate of phenolic compounds, and possessed more antioxidant activities and better bacteriostatic effects than BC from wine pomace. These results demonstrate that BC synthesized in situ from wine pomace (especially from enzymatic hydrolysate) is a promising biomolecule with a potential application in wound dressing, tissue engineering, and other biomedical fields.

Raman microspectroscopy and Raman imaging reveal biomarkers specific for thoracic aortic aneurysms.

Aortic rupture and dissection are life-threatening complications of ascending thoracic aortic aneurysms (aTAAs), and risk assessment has been largely based on the monitoring of lumen size enlargement. Temporal changes in the extracellular matrix (ECM), which has a critical impact on aortic remodeling, are not routinely evaluated, and cardiovascular biomarkers do not exist to predict aTAA formation. Here, Raman microspectroscopy and Raman imaging are used to identify spectral biomarkers specific for aTAAs in mice and humans by multivariate data analysis (MVA). Multivariate curve resolution-alternating least-squares (MCR-ALS) combined with Lasso regression reveals elastic fiber-derived (Ce1) and collagen fiber-derived (Cc6) components that are significantly increased in aTAA lesions of murine and human aortic tissues. In particular, Cc6 detects changes in amino acid residues, including phenylalanine, tyrosine, tryptophan, cysteine, aspartate, and glutamate. Ce1 and Cc6 may serve as diagnostic Raman biomarkers that detect alterations of amino acids derived from aneurysm lesions.

Poly(Vinyl Alcohol) Cryogel Membranes Loaded with Resveratrol as Potential Active Wound Dressings.

Hydrogel wound dressings are highly effective in the therapy of wounds. Yet, most of them do not contain any active ingredient that could accelerate healing. The aim of this study was to prepare hydrophilic active dressings loaded with an anti-inflammatory compound - trans-resveratrol (RSV) of hydrophobic properties. A special attention was paid to select such a technological strategy that could both reduce the risk of irritation at the application site and ensure the homogeneity of the final hydrogel. RSV dissolved in Labrasol was combined with an aqueous sol of poly(vinyl) alcohol (PVA), containing propylene glycol (PG) as a plasticizer. This sol was transformed into a gel under six consecutive cycles of freezing (-80 °C) and thawing (RT). White, uniform and elastic membranes were successfully produced. Their critical features, namely microstructure, mechanical properties, water uptake and RSV release were studied using SEM, DSC, MRI, texture analyser and Franz-diffusion cells. The cryogels made of 8 % of PVA showed optimal tensile strength (0.22 MPa) and elasticity (0.082 MPa). The application of MRI enabled to elucidate mass transport related phenomena in this complex system at the molecular (detection of PG, confinement effects related to pore size) as well as at the macro level (swelling). The controlled release of RSV from membranes was observed for 48 h with mean dissolution time of 18 h and dissolution efficiency of 35 %. All in all, these cryogels could be considered as a promising new active wound dressings.

A pilot study on biaxial mechanical, collagen microstructural, and morphological characterizations of a resected human intracranial aneurysm tissue.

Intracranial aneurysms (ICAs) are focal dilatations that imply a weakening of the brain artery. Incidental rupture of an ICA is increasingly responsible for significant mortality and morbidity in the American's aging population. Previous studies have quantified the pressure-volume characteristics, uniaxial mechanical properties, and morphological features of human aneurysms. In this pilot study, for the first time, we comprehensively quantified the mechanical, collagen fiber microstructural, and morphological properties of one resected human posterior inferior cerebellar artery aneurysm. The tissue from the dome of a right posterior inferior cerebral aneurysm was first mechanically characterized using biaxial tension and stress relaxation tests. Then, the load-dependent collagen fiber architecture of the aneurysm tissue was quantified using an in-house polarized spatial frequency domain imaging system. Finally, optical coherence tomography and histological procedures were used to quantify the tissue's microstructural morphology. Mechanically, the tissue was shown to exhibit hysteresis, a nonlinear stress-strain response, and material anisotropy. Moreover, the unloaded collagen fiber architecture of the tissue was predominantly aligned with the testing Y-direction and rotated towards the X-direction under increasing equibiaxial loading. Furthermore, our histological analysis showed a considerable damage to the morphological integrity of the tissue, including lack of elastin, intimal thickening, and calcium deposition. This new unified characterization framework can be extended to better understand the mechanics-microstructure interrelationship of aneurysm tissues at different time points of the formation or growth. Such specimen-specific information is anticipated to provide valuable insight that may improve our current understanding of aneurysm growth and rupture potential.

Influences of Molecular Weights on Physicochemical and Biological Properties of Collagen-Alginate Scaffolds.

For tissue engineering applications, biodegradable scaffolds containing high molecular weights (MW) of collagen and sodium alginate have been developed and characterized. However, the properties of low MW collagen-based scaffolds have not been studied in previous research. This work examined the distinctive properties of low MW collagen-based scaffolds with alginate unmodified and modified by subcritical water. Besides, we developed a facile method to cross-link water-soluble scaffolds using glutaraldehyde in an aqueous ethanol solution. The prepared cross-linked scaffolds showed good structural properties with high porosity (~93%) and high cross-linking degree (50-60%). Compared with collagen (6000 Da)-based scaffolds, collagen (25,000 Da)-based scaffolds exhibited higher stability against collagenase degradation and lower weight loss in phosphate buffer pH 7.4. Collagen (25,000 Da)-based scaffolds with modified alginate tended to improve antioxidant capacity compared with scaffolds containing unmodified alginate. Interestingly, in vitro coagulant activity assay demonstrated that collagen (25,000 Da)-based scaffolds with modified alginate (C25-A63 and C25-A21) significantly reduced the clotting time of human plasma compared with scaffolds consisting of unmodified alginate. Although some further investigations need to be done, collagen (25,000 Da)-based scaffolds with modified alginate should be considered as a potential candidate for tissue engineering applications.

Biomechanical characterization of human temporal muscle fascia in uniaxial tensile tests for graft purposes in duraplasty.

The human temporal muscle fascia (TMF) is used frequently as a graft material for duraplasty. Encompassing biomechanical analyses of TMF are lacking, impeding a well-grounded biomechanical comparison of the TMF to other graft materials used for duraplasty, including the dura mater itself. In this study, we investigated the biomechanical properties of 74 human TMF samples in comparison to an age-matched group of dura mater samples. The TMF showed an elastic modulus of 36 ± 19 MPa, an ultimate tensile strength of 3.6 ± 1.7 MPa, a maximum force of 16 ± 8 N, a maximum strain of 13 ± 4% and a strain at failure of 17 ± 6%. Post-mortem interval correlated weakly with elastic modulus (r = 0.255, p = 0.048) and the strain at failure (r = - 0.306, p = 0.022) for TMF. The age of the donors did not reveal significant correlations to the TMF mechanical parameters. Compared to the dura mater, the here investigated TMF showed a significantly lower elastic modulus and ultimate tensile strength, but a larger strain at failure. The human TMF with a post-mortem interval of up to 146 h may be considered a mechanically suitable graft material for duraplasty when stored at a temperature of 4 °C.

Biomimetic fabrication and application of fibrous-like nanotubes.

AIMS: To investigate the biomimetic fabrication of fibrous-like organic-inorganic hybrid structures via a simple bottom-up approach, viz. self-assembly of simple molecules, and apply fibrous-like composites as a novel primer to improve dentin bond strengths of self-etch adhesives. MATERIALS AND METHODS: The resultants of commercial amorphous calcium phosphate (ACP) nanoparticles and 10-methacryloyloxydecyl dihydrogen phosphate (MDP) ethanol-aqueous solution were analyzed by TEM, SEM, XRD, DLS and AFM. The acid and alkali resistance of abovementioned self-assembled composites were analyzed with TEM. Micro-tensile bond strengths (MTBS) tests were performed after polished dentin surfaces were pretreated with self-assembled composites. The pretreated dentin surfaces and dentin-resin interfaces were characterized by SEM/TEM. KEY FINDINGS: ACP nanoparticles in MDP solution could self-assemble into fibrous-like nanotube structures in 8 nm diameter. Self-assembly and self-proliferation process went from ACP nanoparticles, dissolved ACP nanoparticles (less than 50 nm), twig-like structures and fibrous-like nanotubes to cellular networks. The fibrous-like nanotubes were only detected when the amount of ACP in reaction system were more than 0.01 g. The more ACP interacted with MDP, the more fibrous-like nanotubes were formed. After the dentin surfaces were treated with fibrous-like nanotube composites, MTBS could be significantly improved. Moreover, the fibrous-like nanotube structures could be resistant to acidic challenge, and were stable at least for 3 months. SIGNIFICANCE: The fibrous-like nanotube structures could be self-assembled via a bottom-up approach at certain ratio of MDP and commercial ACP nanoparticles. The application of fibrous-like nanotube composites as a novel primer prior to self-etch adhesives greatly improved dentin bond strengths.

Effect of storage and preconditioning of healing rat Achilles tendon on structural and mechanical properties.

Tendon tissue storage and preconditioning are often used in biomechanical experiments and whether this generates alterations in tissue properties is essential to know. The effect of storage and preconditioning on dense connective tissues, like tendons, is fairly understood. However, healing tendons are unlike and contain a loose connective tissue. Therefore, we investigated if storage of healing tendons in the fridge or freezer changed the mechanical properties compared to fresh tendons, using a pull-to-failure or a creep test. Tissue morphology and cell viability were also evaluated. Additionally, two preconditioning levels were tested. Rats underwent Achilles tendon transection and were euthanized 12 days postoperatively. Statistical analyzes were done with one-way ANOVA or Student's t-test. Tissue force and stress were unaltered by storage and preconditioning compared to fresh samples, while high preconditioning increased the stiffness and modulus (p ≤ 0.007). Furthermore, both storage conditions did not modify the viscoelastic properties of the healing tendon, but altered transverse area, gap length, and water content. Cell viability was reduced after freezing. In conclusion, preconditioning on healing tissues can introduce mechanical data bias when having extensive tissue strength diversity. Storage can be used before biomechanical testing if structural properties are measured on the day of testing.

Latent-transforming growth factor beta-binding protein-2 (LTBP-2) is required for longevity but not for development of zonular fibers.

Latent-transforming growth factor beta-binding protein 2 (LTBP-2) is a major component of arterial and lung tissue and of the ciliary zonule, the system of extracellular fibers that centers and suspends the lens in the eye. LTBP-2 has been implicated previously in the development of extracellular microfibrils, although its exact role remains unclear. Here, we analyzed the three-dimensional structure of the ciliary zonule in wild type mice and used a knockout model to test the contribution of LTBP-2 to zonule structure and mechanical properties. In wild types, zonular fibers had diameters of 0.5-1.0 micrometers, with an outer layer of fibrillin-1-rich microfibrils and a core of fibrillin-2-rich microfibrils. LTBP-2 was present in both layers. The absence of LTBP-2 did not affect the number of fibers, their diameters, nor their coaxial organization. However, by two months of age, LTBP-2-depleted fibers began to rupture, and by six months, a fully penetrant ectopia lentis phenotype was present, as confirmed by in vivo imaging. To determine whether the seemingly normal fibers of young mice were compromised mechanically, we compared zonule stress/strain relationships of wild type and LTBP-2-deficient mice and developed a quasi-linear viscoelastic engineering model to analyze the resulting data. In the absence of LTBP-2, the ultimate tensile strength of the zonule was reduced by about 50%, and the viscoelastic behavior of the fibers was altered significantly. We developed a harmonic oscillator model to calculate the forces generated during saccadic eye movement. Model simulations suggested that mutant fibers are prone to failure during rapid rotation of the eyeball. Together, these data indicate that LTBP-2 is necessary for the strength and longevity of zonular fibers, but not necessarily for their formation.

Does using high-tensile strength tape improve the fixation strength in tendon graft fixation with needleless suture wrapping techniques compared to a suture?

PURPOSE: To compare the biomechanical properties of a high-tensile strength suture and high-tensile strength tape in tendon graft fixation using two needleless suture wrapping techniques, the modified Prusik knot and modified rolling hitch. METHODS: Two needleless suture wrapping techniques, the modified rolling hitch (MR) and modified Prusik knot (MP), were utilized. Meanwhile, two kinds of suture materials, a No. 2 braided nonabsorbable high-strength suture (S) and a 1.3 mm high-tensile strength tape (T), were used. A total of 40 porcine tendons were used, which were randomly divided into four groups. Each group was assigned to one of the following groups: MRS, MRT, MPS, and MPT. Each specimen was pretensioned to 100 N for three cycles, cyclically loaded from 50 to 200 N for 200 cycles, and finally loaded to failure. RESULTS: The MRT group (34.1 ± 3.5%) had a significantly higher value compared with the MRS (29.7 ± 2.3%), MPS (27.1 ± 3.6%) and MPT (29.5 ± 4.0%) groups in term of elongation after cyclic loadings (p = 0.002). In terms of ultimate failure load, there were no significant differences in the MRS (401 ± 27 N), MRT (380 ± 27 N), MPS (398 ± 44 N) and MPT (406 ± 49 N) values (p = 0.539). All specimens failed due to suture breakage at the knots. CONCLUSION: Compared with the high-tensile strength suture, using the high-tensile strength tape lead to greater elongation after cyclic loading when the modified rolling hitch was used. No differences in terms of elongation after cyclic loading and load to failure were found between the high-tensile strength suture and tape using the modified Prusik knot.

Bioinspired tissue-compliant hydrogels with multifunctions for synergistic surgery-photothermal therapy.

Operation therapy is a common treatment for many cancers, but malignant tumors likely recur and metastasize after surgery, resulting in treatment failure. In this study, we aimed at synthesizing a multifunctional hydrogel patch that features multifunctions for synergistic surgery-photothermal therapy. Our polydopamine nanoparticle (PDA NP)-crosslinked poly(acrylamide-co-N-(3-aminopropyl)methacrylamide) hydrogels undergo several dynamic interactions (e.g., hydrogen bonds, π-π interactions, and imine bonds), which confer high stretchability (∼3430%) and adhesive strength to porcine skin (∼75 kPa) that mimics soft wound tissues. Furthermore, PDA NP incorporation into the hydrogel matrix endows it with photothermal responsivity under 808 nm irradiation. As a proof of concept, our hydrogel system was used to ablate residual tumors in 4T1 tumor-bearing mice models after surgery via photothermal therapy. We find that synergistic operation-photothermal therapy effectively eradicates solid tumors and prevents cancer recurrence in mice. We envision that our work provides an effective synergistic strategy for cancer treatment and offers great potential for clinical applications.

Influence of the integrity of tendinous membrane and fascicle on biomechanical characteristics of tendon-derived scaffolds.

The biomechanical characteristics of tendon grafts is essential for tendon reconstructive surgery due to its great role in providing a good mechanical environment for tendon healing and regeneration. In our previous studies, the decellularized tendon slices (DTSs) and decellularized bovine tendon sheets (DBTSs) scaffolds were successfully developed. However, the influence of the integrity of tendinous membrane (endotenon and epitenon) and fascicle on biomechanical characteristics of these two scaffolds was not investigated. In this study, we assessed the integrity of tendinous membrane and fascicle of the tendon derived scaffolds and its effect on the biomechanical characteristics. The results of histological staining indicated that the DBTSs had complete endotenon and epitenon, while DTSs had no epitenon at all, only part of endotenon was remained. Furthermore, the DBTSs, and DTSs with thickness of 900 µm had complete fascicles, while DTSs with thickness less than 600 µm had almost no complete fascicles. The fibrous configuration of epitenon was well-preserved in the surface of the DBTSs but the surface ultrastructure of the DTSs was aligned collagen fibers based on scanning electron microscopy examination. The results of transmission electron microscopy showed that there was no significant difference between the DBTSs and DTSs. Mechanically, the DBTSs and DTSs with thickness of 900 µm showed similar ultimate tensile strength and stiffness to native tendon segments (NTSs). The strain at break and suture retention strength of the DBTSs showed much higher than that of the DTSs (p < 0.05). Additionally, the DBTSs showed higher ultimate load than the DTSs when these scaffolds were sutured with NTSs (p < 0.05) through the modified Kessler technique based on a uniaxial tensile test. This study demonstrated that DTSs may be used as a patch for reinforcing tendon repair, while DBTSs may be used as a bridge for reconstructing tendon defects.

Study on the Similarity of Biomechanical Behavior between Gelatin and Porcine Liver.

As a natural polymer, gelatin is increasingly being used as a substitute for animals or humans for the simulation and testing of surgical procedures. In the current study, the similarity verification was neglected and a 10 wt.% or 20 wt.% gelatin sample was used directly. To compare the mechanical similarities between gelatin and biological tissues, different concentrations of gelatin samples were subjected to tensile, compression, and indentation tests and compared with porcine liver tissue. The loading rate in the three tests fully considered the surgical application conditions; notably, a loading speed up to 12 mm/s was applied in the indentation testing, the tensile test was performed at a speed of 1 mm/s until fracture, and the compression tests were compressed at a rate of 0.16 mm/s and 1 mm/s. A comparison of the results shows that the mechanical behaviors of low-concentration gelatin samples involved in the study are similar to the mechanical behavior of porcine liver tissue. The results of the gelatin material were mathematically expressed by the Mooney-Rivlin model and the Prony series. The results show that the material properties of gelatin can mimic the range of mechanical characteristics of porcine liver, and gelatin can be used as a matrix to further improve the similarity between substitute materials and biological tissues.

The Specific Molecular Composition and Structural Arrangement of Eleutherodactylus Coqui Gular Skin Tissue Provide Its High Mechanical Compliance.

A male Eleutherodactylus Coqui (EC, a frog) expands and contracts its gular skin to a great extent during mating calls, displaying its extraordinarily compliant organ. There are striking similarities between frog gular skin and the human bladder as both organs expand and contract significantly. While the high extensibility of the urinary bladder is attributed to the unique helical ultrastructure of collagen type III, the mechanism behind the gular skin of EC is unknown. We therefore aim to understand the structure-property relationship of gular skin tissues of EC. Our findings demonstrate that the male EC gular tissue can elongate up to 400%, with an ultimate tensile strength (UTS) of 1.7 MPa. Species without vocal sacs, Xenopus Laevis (XL) and Xenopus Muelleri (XM), elongate only up to 80% and 350% with UTS~6.3 MPa and ~4.5 MPa, respectively. Transmission electron microscopy (TEM) and histological staining further show that EC tissues' collagen fibers exhibit a layer-by-layer arrangement with an uninterrupted, knot-free, and continuous structure. The collagen bundles alternate between a circular and longitudinal shape, suggesting an out-of-plane zig-zag structure, which likely provides the tissue with greater extensibility. In contrast, control species contain a nearly linear collagen structure interrupted by thicker muscle bundles and mucous glands. Meanwhile, in the rat bladder, the collagen is arranged in a helical structure. The bladder-like high extensibility of EC gular skin tissue arises despite it having eight-fold lesser elastin and five times more collagen than the rat bladder. To our knowledge, this is the first study to report the structural and molecular mechanisms behind the high compliance of EC gular skin. We believe that these findings can lead us to develop more compliant biomaterials for applications in regenerative medicine.

Experimental and mathematical characterization of coronary polyamide-12 balloon catheter membranes.

The experimental quantification and modeling of the multiaxial mechanical response of polymer membranes of coronary balloon catheters have not yet been carried out. Due to the lack of insights, it is not shown whether isotropic material models can describe the material response of balloon catheter membranes expanded with nominal or higher, supra-nominal pressures. Therefore, for the first time, specimens of commercial polyamide-12 balloon catheters membranes were investigated during uniaxial and biaxial loading scenarios. Furthermore, the influence of kinematic effects on the material response was observed by comparing results from quasi-static and dynamic biaxial extension tests. Novel clamping techniques are described, which allow to test even tiny specimens taken from the balloon membranes. The results of this study reveal the semi-compliant, nonlinear, and viscoelastic character of polyamide-12 balloon catheter membranes. Above nominal pressure, the membranes show a pronounced anisotropic mechanical behavior with a stiffer response in the circumferential direction. The anisotropic feature intensifies with an increasing strain-rate. A modified polynomial model was applied to represent the realistic mechanical response of the balloon catheter membranes during dynamic biaxial extension tests. This study also includes a compact set of constitutive model parameters for the use of the proposed model in future finite element analyses to perform more accurate simulations of expanding balloon catheters.

Wound healing after excision of subcutaneous tumors treated with near-infrared photoimmunotherapy.

Near-infrared photoimmunotherapy (NIR-PIT) is a novel cancer therapy that employs a combination of infrared light and tumor-targeted monoclonal antibody-photoabsorber conjugates to cause both direct tumor necrosis and immunogenic cell death. NIR-PIT may have potential in the perioperative setting before surgery, and therefore it is important to know the effect of NIR-PIT on wound healing. Fifty mice were implanted with subcutaneous xenografts of N87 human gastric cancer cells, and tumors were excised after reaching a predetermined size. After excision, 30 mice were split into three groups: Controls, NIR-PIT 1 day prior to surgery and NIR-PIT 3 days prior to surgery. The quantity of reactive oxygen species (ROS) in each wound was measured on Postoperative Days 2 and 4, and mice were monitored weekly for 4 weeks for evidence of local tumor recurrence as well as clinical evidence of wound healing complications (eg, dehiscence, infection). The remaining 20 mice (10 controls, 10 treated with NIR-PIT 1 day prior to surgery) were sacrificed on either Postoperative Day 7 or 14, the skin around wounds were excised, and tensile strength was measured with a digital force gauge. There were no significant differences between treatment and control groups with respect to wound ROS levels, wound tensile strength, local tumor recurrence, or postoperative complication rates (P > .05). In conclusion, neoadjuvant (pre-operative) NIR-PIT shows no evidence of adverse wound healing effects, and it is likely a safe adjunctive treatment to surgery. Postoperative use of NIR-PIT merits investigation.